Also anybody know of a good sources to replace those o-rings?
Announcement
Collapse
No announcement yet.
No O-rings for mixture scre(air jets)
Collapse
X
-
BrianH
No O-rings for mixture scre(air jets)
I've got a 79 GS425, and the O-rings for the mixture screws have deteriorated. How can I expect it to run with no o-rings on there? Real lean? Low power?
Also anybody know of a good sources to replace those o-rings?Last edited by Guest; 09-30-2009, 04:45 PM.Tags: None
-
BrianH
-
BrianH
-
Sure, can't hurt. Might be hard to get a good idle and crisp low throttle response, but it shouldn't hurt anything. It might run just fine, some of them do with completely shot o rings.
You can always add the orings when you get them, without even pulling the carbs.
Life is too short to ride an L.
Comment
Comment