rear brake question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • b2kvapor

    #1

    rear brake question

    it this meant to be used for a cable
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35788
    • Torrance, CA

    #2
    Originally posted by b2kvapor
    it this meant to be used for a cable
    Cable or rod.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • ptm

      #3
      I don't know what that's for. My GS400 has that same thing on the side of the rear drum but there's nothing attached to it. The bike is bone stock and I've had it since new, so I'm sure it wasn't used for anything from the factory. That part was used on about 40 other models, so it probably had some use on one or more of them...

      Comment

      • supersonictoys

        #4
        yep its for a cable. why couldn't that same hub have been used on some bike with a front drum brake at one time? probably was and the casting just wasn't changed over the years

        Comment

        Working...