Carb Soak recommendations.

[schvezon]

I am rebuilding the stock carbs on my 77 gs750 for the first time and want to do it right. I want to soak the carbs in a cleaner in addition to using a hand cleaner and fine brush for more detailed work. Any recommendations on the best way to do the soak?

[rudy]

I am rebuilding the stock carbs on my 77 gs750 for the first time and want to do it right. I want to soak the carbs in a cleaner in addition to using a hand cleaner and fine brush for more detailed work. Any recommendations on the best way to do the soak?

Read through the carb rebuild stuff on BassCliff's site. You'll have to dismantle them all the way down and take out all the O-rings. You should get new O-rings from http://www.cycleorings.com/.

Get a jug of carb dip, and dunk the carbs for a full 24 hours. Pull them out, clean them off, spray them down, check for dirt. If they're still dirty, dunk again. Blow out all the little passages with compressed air.

[tkent02]

I am rebuilding the stock carbs on my 77 gs750 for the first time and want to do it right. I want to soak the carbs in a cleaner in addition to using a hand cleaner and fine brush for more detailed work. Any recommendations on the best way to do the soak?

What chemicals are available to you depends a lot on how well your government is keeping you safe from yourself for your own good. Where are you located?

[81gs1100]

Yamalube Carburator dip Thumbs up

[Guest]

Barrymans comes highly recomended by many including myself.
20 bux at Advance Auto Parts.

Follow the instructions on Basscliffs site.