81 GS750 front axle torque spec. Thanks Den
-
-
You should bookmark this link, or just print out the whole PDF and get it bound at Kinko's. It's your standard shop manual, where I located the axle nut torque spec. http://www.mtsac.edu/~cliff/storage/...arly8valve.pdf
Compliments of BassCliff, who will no doubt show up shortly in order to give you your welcome.
The spec is 26.0-37.6 ft-lbs. -
I measure mine tight as hell and line up the cotter pin hole.
Comment
-
Greetings and Salutations!!
Hi Mr. BigDenny,
Feel free to help yourself to the manuals and other information on my website. The answers to most common questions can be found by following the two links below. Now let me say "Hi"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliffComment
Comment