I have a chance at a 81 1000e parts bike,but i have a 81 1100e bike, i'm wanting to know if major parts will swap out, ( motor , carbs, trans, wheels, etc..) thanks chris, this is my first post.
-
-
Wheels are the same, carbs may the same but jetted differently. I have also seen a 1980 GS1000E with VM carbs, not sure what's up with that. 1981 1100E was a four valve per cylinder engine, 1980 1000E was a two valve engine, there was no 1981 1000E so something is not right here. I could use a few parts if you get it. -
I have not heard of a 81 GS1000e. I thought 1980 was the last year for the 2-valve E model.Comment
-
thanks mr t-dar, thats 2 no such bike, so red flag alert!!!! thanks guysComment
-
Post a link to the ad?
I can't find it.Comment
-
-
That's a special 1980 GS1000E vertical climber edition.
GS450E GS650E GS700ES GS1000E GS1000G GS1100G GS1100E
KZ550A KZ700A GPZ750
CB400T CB900F
XJ750RComment
-
Probably a misprint, looks like a pretty decent "80" GS 1000 "E".1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100Comment
-
NOTHING from the 8v 1000 motor will swap to your 16v 1100 motor. The carbs will swap if they are both BS type, (cv carbs) but the jetting is different. The 8v motors used larger jets than the 16v motors for starters...as well as a few other differences. The carb bodies are to my best observation, identical. Wheels, brakes, levers, parts like that will likely swap, but not much else.Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
ok thanks guys, sorry took so long on reply, had a lost in the family, again thanksComment
Comment