79 gs850 carb problems

[KEITH KRAUSE]

anyone have info on the needle postion? How and where do i put the spacers?

I typed some of this info in my previous post. I thought the factory needle clip position was number 3, but if AZR is correct (2), then I'd try 1 1/2 positions richer (3 1/2). Place the clip in position 4 from the top and place the jetting spacer on top of it.

[KEITH KRAUSE]

Of course, I may be wrong and 1 or 2 positions richer may work. You wouldn't need jetting spacers. I just don't think 1 position richer will be enough and I'm thinking 2 may be too much. You could always try 2 positions and test. If too rich, then you go leaner.
But trying to get it right the first try, I'd try 1 1/2 positions richer.