81 GSX1100E Breakdown??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • posplayr
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    • Dec 2007
    • 23673
    • Tucson Az

    #16
    Originally posted by chickenstrip
    friend said there is a puff of blue smoke when changing gears
    I would not worry about that it seems normal. I think even ine with complete 1166 rebore puffs after 4K miles on the hard shift.

    Comment

    • chickenstrip

      #17
      Originally posted by posplayr
      I would not worry about that it seems normal. I think even ine with complete 1166 rebore puffs after 4K miles on the hard shift.
      Thanks I hope your right but a compression test on the weekend will end speculation.Nobody has mentioned blue smoke before and I am not exactly
      easy on my bikes even the old ones.We did about 400ks on the weekend and I had to add about 300mls of oil to get back to the high level.Have never done that before but we were not hanging around so maybe??

      You have 2 very very nice bikes there

      Comment

      • Guest

        #18
        Relax, you just washed out your cylinders. The rings should reseat and you'll be fine.

        Comment

        • mighty13d

          #19
          Originally posted by chef1366
          Relax, ... and you'll be fine.


          Those 5 words. Take them to heart. This shouldn't cause any lasting issues. Even if it does burn a tiny bit of oil it will be fine. These engines are pretty hearty engines.

          Comment

          • chickenstrip

            #20
            OK but will still compression test it just to see.

            Comment

            • posplayr
              Forum LongTimer
              GSResource Superstar
              Past Site Supporter
              • Dec 2007
              • 23673
              • Tucson Az

              #21
              Originally posted by chickenstrip
              OK but will still compression test it just to see.
              hold the throttle open while you do or we will have a new thread about low compression

              Comment

              Working...