New Problems with Transmission/Clutch

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blowerbike
    Forum Guru
    GSResource Superstar
    • Aug 2008
    • 7057
    • Ohio Closer to KY Than Cleveland
    #16
    the fibers become hard and charred and sometimes even HD springs won't fix the slipping 100%.
    even if they measure "within spec" that still doesn't mean the fibers are usable.
    i wouldn't waste my time with OEM springs.
    purchase a set of HD springs and install half a set.
    i like the gold barnett's.
    the red coated HD springs are monsters and maybe not for the limp wristed on this board.

      Comment

      • SuzukiGS
        #17
        The oil isn't the problem. The were slipping before I changed the oil. It's just standard 15w-40w oil.

        So now I have mixxed veiws on the HD springs. Why would they be any better?

          Comment

          • SqDancerLynn1
            #18
            The HD springs grip the clutch plates with more force. Just use three of them with three of the stockers. Otherwise clutch pull gets to be excessive

              Comment

              Previous 1 2 template Next
              Working...