Coil question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tompasio
    #1

    Coil question

    Today i checked my coils cap to cap with a Ohm-meter, Coil Cyl 1-4 shows 23,6k and Coil Cyl 2-3 shows 25,8k. Manual says 30k-50k .Are the coils too bad.I have change the wires to Accel yellow and new NGK caps,with a 5 ohm resistor.
    Tags: None
    • rustybronco
      Forum LongTimer
      Bard Award Winner
      GSResource Superstar
      Past Site Supporter
      • Jul 2005
      • 14961
      • Marysville, Michigan
      #2
      They're just fine at 23.6 and 25.8 K...
      De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

      http://www.thegsresources.com/_forum...35#post1625535

        Comment

        • SqDancerLynn1
          #3
          Are your accell wires solid core or suppression?? If they are supression you need to use automotive type plug ends.

            Comment

            • Steve
              GS Whisperer
              • Jun 2005
              • 35925
              • southwest oHIo
              #4
              Originally posted by Tompasio
              ... and new NGK caps,with a 5 ohm resistor.
              Probably a 5K ohm resistor, but we knew what you meant.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

                Comment

                • Tompasio
                  #5
                  Originally posted by Steve
                  Probably a 5K ohm resistor, but we knew what you meant.

                  .
                  Thanks Steve,My english is a bit rusty.

                    Comment

                    • Tompasio
                      #6
                      Originally posted by SqDancerLynn1
                      Are your accell wires solid core or suppression?? If they are supression you need to use automotive type plug ends.
                      I have copper core.

                        Comment

                        Previous template Next
                        Working...