carb rail screw size

[indyjoel]

Does anyone know what the size of the screws are that screw into both carb rails.

I had to have mine drilled and am not sure what I need to replace them with.

[Steve]

If I am reading the part numbers correctly, they are 5 x 12 and 6 x 12.

The part numbers are 02142-05127 and 02112-06127.

.

[mriddle]

Give a man a fish .. good on ya Steve

[Steve]

Give a man a fish ...

“Give a man a fish; you have fed him for today. Teach a man to fish; and you will not have to listen to his incessant whining about how hungry he is.”—Author unknown

“Give a man a fish; you have fed him for today. Teach a man to fish; and you can sell him fishing equipment.”—Author unknown

“Give a man a fish; you have fed him for today. Teach a man to use the Net and he won't bother you for weeks.”—Author unknown

“Teach a man to fish and you feed him for a lifetime. Unless he doesn't like sushi—then you also have to teach him to cook.”—Auren Hoffman, Herald Philosopher

“Give a man a fish; you have fed him for today. Teach a man to fish, and he will sit in the boat and drink beer all day.”—OldFox

“Give a man a fish; you have fed him for today. Teach a man to fish; and you have fed him for a lifetime. Teach a man to sell fish and he eats steak.”—Author unknown

[mriddle]

ba dah bump

[Steve]

[indyjoel]

If I am reading the part numbers correctly, they are 5 x 12 and 6 x 12.

The part numbers are 02142-05127 and 02112-06127.

.

Thanks Steve I will check the fiche next time.

BTW for others thanks I am full on the fish...., but at least I know how to fish...