Transmission gurus...please check my dogs!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #16
    Originally posted by blowerbike
    lol@ extreme load...
    how much do you weigh bill????
    hahahaa
    HoHoHo
    Shifting at 12K without clutch
    Sound familar?

    Comment

    • blowerbike
      Forum Guru
      GSResource Superstar
      • Aug 2008
      • 7057
      • Ohio Closer to KY Than Cleveland

      #17
      Originally posted by chef1366
      HoHoHo
      Shifting at 12K without clutch
      Sound familar?
      i snap the clutch lever..
      the kawi guys blip the throttle.
      MOOOOOOOO MOOOOOOOOOOOOO

      Comment

      • Baatfam
        Forum LongTimer
        Past Site Supporter
        Super Site Supporter
        • Jul 2006
        • 18750
        • Knoxville, TN

        #18
        Originally posted by chef1366
        Jeebus Bob
        What did that sound like?
        LOL...well obviously those weren't worn off, they were sheared off...
        Also snap a tooth off 3rd, cracked a couple of teeth on second, bent the input shaft, bent the forks, bent the shift rods....

        Originally posted by blowerbike
        i get 100 bucks(GS resources price) for both complete shafts/ plus shipping...
        i have 8-10 or so on the shelf.
        Thanks...I'll keep that in mind...

        Originally posted by chef1366
        My transmission looks perfect but I had a little trouble speed shifting under extreme load. Can't visually see a problem but my guess would be the forks.
        I'm sure you know this, but just in case...
        If you have marks on the fork, like in the picture below, the fork is bent.

        Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
        '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

        Comment

        Working...