Can you ID this pipe?

[80GS1000]

http://cgi.ebay.com/ebaymotors/1979-Suzuki-GS1000-GS-1000-4-Into-1-Aftermarket-Exhaust_W0QQcmdZViewItemQQhashZitem35a7a96f27QQitemZ230446165799QQptZMotorcyclesQ5fPartsQ5fAccessories

Anyone know what make of pipe this might be?

That seller has a ton of low mileage GS1000 parts too for all the 1000 fans out there.

[67fire]

It looks like an aftermarket Honda exhaust.

Eric

[Guest]

Possibly a Marshall Deeptone from Europe. Can't believe there isn't a decent pic of the can, among the 10 he uploaded.
Tony.

[Nessism]

[URL]

That seller has a ton of low mileage GS1000 parts too for all the 1000 fans out there.

I'm bidding/going to bid on some of that guys stuff. So far going after the chain guard (please, don't bid against me) and thinking about the cylinder/pistons and maybe the crank. The head would be a great pickup for someone with a VM equipped bike, just doing a valve job costs about $200 these days and I bet that head will go for far less that that.

[salty_monk]

I might pick up the fork plate and forks if they go at the right price.....

Thanks PJ

[piester]

whatever it is its definetly higher end. all of the welds look nice. the 4 primary tubes are removable. the can has a removable baffle it looks like. the metal apears to be thicker gauge than a mac or cheaper kerker, and the flanges to bolt it to the bike have heat sinks built into them. it will probably go for what the header alone is worth

[Flying Fish]

I thought Marshall Deeptone too,

http://www.sounddistribution.co.uk/images/01-exhausts/marshall.htm

If so a new one is ?229 (about $400 ish)

[steve murdoch]

I'm bidding/going to bid on some of that guys stuff. So far going after the chain guard (please, don't bid against me) and thinking about the cylinder/pistons and maybe the crank. The head would be a great pickup for someone with a VM equipped bike, just doing a valve job costs about $200 these days and I bet that head will go for far less that that.

Surprisingly, I was the only bidder on the head.
Did you get the chainguard?

[Nessism]

Surprisingly, I was the only bidder on the head.
Did you get the chainguard?

You got an outstanding deal on that head. The chainguard went for $83...so needless to say, I was out.

[salty_monk]

I got a fork "finisher" & an oil pan...