Anything else I should do while replacing the monoshock?

[UncleMike]

Got a Works monoshock off eBay, and before I dive into putting it on, I figured I should ask my esteemed brethren at the GSR if there's anything else I should be checking/cleaning/lubing/etc while I've got the rear wheel/shock off.

Suggestions/tips/tricks/insults?

Thanks!
/Mike

[Nessism]

I'd lube all the swingarm and rocker pivots. If you still have the rubber brake lines installed I'd change them too while everything is apart.

[UncleMike]

I'd lube all the swingarm and rocker pivots. If you still have the rubber brake lines installed I'd change them too while everything is apart.

Switch over to SS, you mean?

[Nessism]

Switch over to SS, you mean?

Fresh rubber ones would work but yea, I'd go for the teflon/stainless type.