Separating the MEN from the boys (carb)

[tkent02]

It's a whole lot of confirmation-bias, this psych exam. Dude seems to have a beef with some of the more technical forum members.

All of them it seems.

I guess when one knows so much more than the rest of the forum put together, it's hard to be humble.

[Griffin]

All of them it seems.

I guess when one knows so much more than the rest of the forum put together, it's hard to be humble.

Particularly when one is an insufferable prick.

[tkent02]

Particularly when one is an insufferable prick.

I liked it better before your edit.

[Griffin]

I liked it better before your edit.

It's the kinder, gentler, GS Resources.

I liked it better too. It was more accurate.

[Nessism]

The stock cv carb NEEDLE is virtually STRAIGHT compared to a slide carb. Adjusting it is senseless and mere LUCK if at all semi-successful.

While it's true that the needle doesn't have much taper, shimming it 2mm has a very noticeable effect on the mixture of an otherwise stock system.

[Griffin]

While it's true that the needle doesn't have much taper, shimming it 2mm has a very noticeable effect on the mixture of an otherwise stock system.

And I've also taken note of teddux's condescending tone.

He's the first (and only) poster on my ignore list.

Worthless trolls should be ignored, not fed....

[tkent02]

He's the first (and only) poster on my ignore list.

Worthless trolls should be ignored, not fed....

Yeah, I'm in.

Done, but it took a few seconds to figure out howto use ignore. Maybe I should have googled it.

[Griffin]

Yeah, I'm in.

Done, but it took a few seconds to figure out howto use ignore. Maybe I should have googled it.

It's your friend, you know....

[TheCafeKid]

Particularly when one is an insufferable prick.

An apt description for certain. And, IMO, socially acceptable, given the alternative descriptions I would have chosen..

[Turtleface]

Yeah, I'm in.

Done, but it took a few seconds to figure out howto use ignore. Maybe I should have googled it.

Went through the idler jet removal thread. Wow. I think we'll have a general consensus soon. +1 for ignore!

P.S. teddux, there's an off-topic forum if you want to rant, keep the ad hominem attacks out of the tech forums.

[Griffin]

An apt description for certain. And, IMO, socially acceptable, given the alternative descriptions I would have chosen..

Originally, I had used a word to describe him that is a common familiarization of the name "Richard".

[TheCafeKid]

Originally, I had used a word to describe him that is a common familiarization of the name "Richard".

OH!!! You mean "Rich"!! Got it

[Guest]

OH!!! You mean "Rich"!! Got it

[Suzuki_Don]

What's with this insufferable TU*D.

He doesn't even have the guts to tell us where he comes from, or even what country he lives in.

Or for that matter what bike he rides. Does he even own a bike.

Hasn't he heard of a signature. Or is he just too DUMB to know how to do it.

I certainly hope he doesn't live in OZ and I would be running the risk of running into him one day (or is that RUN OVER him someday).

If he lived here he would be summonsed to attend a KANGAROO COURT and you all know the end result of that.

No more TEDDUX


Sorry guys. I don't usually rave on the Technical Forum, but somebody should remove this member once and for all.

[tkent02]

No more TEDDEX

We already did that.
Maybe we separated the boy from the men.