on my 82 gs850gl i just read the resistance between plug wires 2 & 3 and got 33k ohms (good). between 1 & 4 i get no reading (OL on my digital meter). i did not disconnect any other wires from the coil to do the test however. everything is still connected under the tank- could that be the problem?? the bike runs fine except for an occasional stumbling problem at about 3000 rpm's. thanks for helping.
-
-
You should read something, there would apear to be a small break in the circut some place, possibly a cap or one of the wires, the high voltage is able to jump the break but you will loose some power. -
Sounds like a problem to me.Comment
-
coil resistance
i think i'm going to try replacing plug boots first, then recheck the resistance. thanks for the help--i'll post resultsComment
Comment