Clutch plates

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Anonymous

    #1

    Clutch plates

    i'm going to do my clutch plates and springs and was wondering before i start. Do I need any special tools or any tricks, it's a 82 GS11E. looks pretty straight forward in the manuel, but it always does till u start
  • Anonymous

    #2
    Should be no surprises. Don't over torque the pressure plate bolts, they are real small.

    Comment

    • SqDancerLynn1

      #3
      You might also think about replacing the pressure plate bolts

      Comment

      • Anonymous

        #4
        are the pressure plate bolts, common bolts from a hardware store?

        Comment

        • SqDancerLynn1

          #5
          You should be able to get them from the dealer, If not look for a nut /bolt supply store You need a grade 8 or metric 10.9? NOT a hardware store bolt

          Comment

          Working...