Announcement

Collapse
No announcement yet.

Mikuni cv34?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Mikuni cv34?

    Do anywone know what level the floaters shuld be in mm? I hope someone understand what i mean.Its a gs(x)1100e-81
    Tags: None
    #2
    flaot levels

    I kee mine set at .88 i do run a little rich but it never runs out of fuel even at full throttle on the track.

    Comment

      #3
      Do you mean the float height? I can't remember off hand but will check my manual when I get home but I think it's somewhere around 22mm.

      Comment

        #4
        I checked the manual and it's 22.4mm +/- 1mm.

        Comment

          #5
          Originally posted by CDNBandit
          I checked the manual and it's 22.4mm +/- 1mm.
          Ditto. I have mine set at 20.5mm, but that's a tuning issue. If your bike is stock then follow CDNBandit's advice.

          Comment

            #6
            Does float level effect the air/fuel ratio of the idle circuit?

            Comment

              #7
              Originally posted by CDNBandit
              I checked the manual and it's 22.4mm +/- 1mm.
              Thank's!

              Comment

                #8
                Originally posted by travellite
                Does float level effect the air/fuel ratio of the idle circuit?
                Not directly. Its more an issue when you are at 1/2 throttle or more. But if the levels are to high flooding becomes a problem, if to low then it can run lean.

                Comment

                Previous template Next
                Working...
                X