Broken BS32mm for 1980 GS750ET

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Anonymous

    #1

    Broken BS32mm for 1980 GS750ET

    Also posted this in the parts wanted section but don't want a reply next December. Broke my number two carb using an impact wrench to brake the phillips screws loose. Vacuum chamber is broken. Done this before and got away with it but not this time.
  • chuckycheese
    Forum Sage
    Charter Member
    Past Site Supporter
    • May 2002
    • 3869
    • The Gulf Coast of south Florida in the winter and northern Nevada in the summer

    #2
    Ebay

    I've never seen a time when they weren't available on Ebay....usually, they're very cheap, too. I bought an extra set and rebuilt them. Just do a search for "GS750" and you'll find them. Good luck!

    I just looked and there are a couple of sets on Ebay right now..also, check out the GS850 stuff because the carbs are the same...only with different jet specifications.
    1980 GS1100E....Number 15!

    Comment

    • Anonymous

      #3
      See now. Was using "GS750 carbs", as a search string and was missing them. Thanks!

      Comment

      • chuckycheese
        Forum Sage
        Charter Member
        Past Site Supporter
        • May 2002
        • 3869
        • The Gulf Coast of south Florida in the winter and northern Nevada in the summer

        #4
        Yes!

        You're welcome! If you just plug in GS750 (and, also, try GS 750), you can look all the other toys for sales, too!!
        1980 GS1100E....Number 15!

        Comment

        Working...