Removing Bezels on and L model

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Anonymous

    #1

    Removing Bezels on and L model

    I have frickin cob webs behind my bezels does anyone know how to separatre them? I took the bolts off the back but the bezels seemed not to separate. The exploded view in the Clymers manual doesn't show separation either. Any suggestions? :?
  • chuckycheese
    Forum Sage
    Charter Member
    Past Site Supporter
    • May 2002
    • 3869
    • The Gulf Coast of south Florida in the winter and northern Nevada in the summer

    #2
    ?

    What's a bezel??? (I know what the word means but I'm unclear what a bezel on a bike would be) :roll:
    1980 GS1100E....Number 15!

    Comment

    • Alan Schlosser
      Forum Mentor
      Charter Member
      Past Site Supporter
      • May 2002
      • 875
      • Ontario, New York

      #3
      If you're talking about the glass bezels on the tach and speedo, they don't come apart.
      1982 GS1100GLZ Sold but still loved
      2008 Bandit 1250 Crashed (cager on a cell phone)
      2008 Bandit 1250 #2

      Comment

      • Dink

        #4
        If you are refering to your instrument cluster? you will need to remove the whole cluster, remove the rear cover and then the instruments to get to the lens & bezels.
        Dink

        Comment

        Working...