howdy... has anyone ordered custom length stainless steel brakelines for their gs? i was considering getting some for mine (i know goodridge has a set made for the 850g, but since i put on smaller bars, i think the upper line would be too long) anyhow, after looking around on dennis kirk, i was wondering what "custom" parts i'd need (hose, obviously, and the banjo bolts, but, other than that, could i just keep the rest of my old front brake components? do i need the banjo adapters? or the double bolt? i don't even really know what those are...)
-
-
-
if you use DK, order your length, and order the ends in Chrome, teh same angle as you have now. No need for the bolts, just get the gaskets. teh 3/8 - 10mm banjo ends are universal, and work perfect on the GS. I just replaced all the lines and ends on mine just 2 months ago, and was easy, and looks/works perfect. :twisted:Comment
-
If you order based on length, keep in mind that SS lines don't bend as sharply as rubber, needing more length to go from point A to point B.
JeffComment
-
I bought Russell lines years ago.
Fit perfect, all I needed was new crush washers.
The banjo bolts were already mounted in place.
I've had them on for years, no leaks, no problemsKeith
-------------------------------------------
1980 GS1000S, blue and white
2015Triumph Trophy SE
Ever notice you never see a motorcycle parked in front of a psychiatrist office?Comment
Comment