Ever used epoxy in direct contact with gas?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Anonymous
    #1

    Ever used epoxy in direct contact with gas?

    I fixed a rusted out fuel sending unit with epoxy once and it worked, but that wasn't constantly bathed in fuel. I cracked a fuel tee removing a set of carbs and it looks repairable if I use the right glue. Thanks, Ed
    Tags: None
    • gremlin
      #2
      go to a auto parts store thay should have a epoxy for fuel tank repair. wal=mart some times carrys it.

        Comment

        • cbxchris
          #3
          Go to a marine dealer ansd ask for marine tex. It will seal a tank. Great stuff!

            Comment

            • Planecrazy
              #4
              Is a fuel tee that expensive?? I would think that you could acquire a replacement tee at an auto parts store that would save you the time and effort involved in repairing the old one. ...or am I missing something here?

              Just a thought,
              Steve 8)

                Comment

                • Detman101
                  #5
                  Not the fuel tees for our carburetors on our GS bikes.
                  I never saw one at any auto shop that would fit my CV carbs without extreme modification.

                  Dm of mD

                    Comment

                    Previous template Next
                    Working...