)
My first question is this, bikebandit list sizes for all the washers except parts 15 and 16 anybody know what size these should be?
My second question is could missing spacers in the rear suspension be the cause of a cornering "weaving" that I seem to experience mostly in high speed corners, although the bike has tried to throw me twice on low speed (30-40kph) very tight curves 8O 8O
.I have also recently replaced the fluid and the metal spacers in the front forks...I replaced the spacers because the previous owner had cut the original spacers to lower the front end. This left almost half an inch of free space inbetween the spacer and the end of the fork #-o I replaced them with longer galvanized pipe. Is this okay or am I playing with fire? How long are the original spacers? There is 10psi of air in the front forks.
I'd really like to get this sorted out because the handling of this bike is not confidince inspiring,.to say the least!
Thanks so much,
Randy
Comment