Need 80 GS-850 valve cover, I don't think mine's fixable

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave_A

    #1

    Need 80 GS-850 valve cover, I don't think mine's fixable

    In the process of removing a stripped valve-cover cap screw, I managed to crack the cover in front of the left-front-rear bolt. The crack runs from the gasket surface to the edge of the bolt-housing...

    I'm guessing this is not weldable, so if anyone's got a 'spare' 850 parts engine, I need a valve cover...

    Psted here and in 'wanted', because they're a tad hard to find online, and the local scrap yard is absurdly expensive for these kind of parts...
  • SqDancerLynn1

    #2
    You would be amazed at what a good welder can do check pm

    Comment

    • Anonymous

      #3
      There's always eBay. There are a lot of 850 parts listed right now.

      Comment

      • Anonymous

        #4
        I have a valve cover but it does not have the four cam covers on the sides. Email me at samova@yahoo.com if you are interested.

        Comment

        Working...