So I went to drive the bike tonight. My first trip of the evening was entirely uneventfull. That trip was a mere two miles.
Now... I went to go for dinner. The bike drove about a quarter mile before I lost a cylinder. I took a right onto a street to turn around got another block before two more cylinders cut out. then... it died. We pushed the bike back to the house. Well.. 2/3 the way back to the house, and then push started the bike. it ran on one, then two, then four cylinders and I was able to ride it back to the house. Ok, so now it runs.
We went to dinner, came back, and it ran just fine again. Sorta.
At the moment it sounds like a valve is seriously out of adjustment There's a click that comes at about 1/2 engine rpm. Which.. isn't necessarily bad. I'm just praying it's not a dropped valve or something of that sort. SO... we shall see.
when I'm at 3000ish rpm there's some popping. IIRC popping means the bike is running lean. right? So I should go up a jet size I suppose. Lets hope I didn't do anything permanant.
HELP!
Comment