Bandit 1200 carbs

[RJ]

Anybody know if a set of 1999 Bandit 1200 carbs will fit an '821100E?

[Anonymous]

That would be yes. All the oil cooled GSXR/Bandit stuff will fit an 81-up 1100E model.

Mark

[Anonymous]

The early year GSXR750 cabs work great. 86/87 750 or 1100

[Anonymous]

The early year GSXR750 cabs work great. 86/87 750 or 1100

Ditto..

I have '86 GSXR750 carbs on my 81 GS1100E, and it runs great.

[Anonymous]

Got a set of '96 Bandit 12 carbs on my '83 motor with K+N filters. Had to fit a Dynojet kit to get it to run above 5K revs!! 8O

[RJ]

Wow! Did the carbs run real lean? How did it run after you put the Dynojet kit in? Sounds like you're running the same setup as me (individual K&N's, Dyna S, new Vance&Hines megaphone, otherwise stock). My 34BS's run really well with a Dynojet kit but I'm trying to get more of a punch in the low to mid rev range. I probably shouldn't fool with new carbs but I can't leave well enough alone.

[Anonymous]

Lean enough to choke it to death!! It's a standard engine with K+N's, and Harris exhaust. The dynojet kit is on its largest jets and the needles in the middle. This still makes it a bit rich though! Havent had time to fine tune it coz am nearly finished rebuilding my spare 1100 engine with ported 1150EFE head, 1168 wiseco, 1150 cams etc..etc and will be trying those carbs on that! Then set it up on a dyno!!

[Steve#1]

Hey guys, I've got a set of carbs off an 86 GSXR750 and a 2001 Bandit 1200....whcih set would give the best performance on my 81 GS1100e?