HELP!! Will a 96-99 GSXR 750 front end work for 82 GS1100E?

**Billy Ricks** · 06-17-2006, 08:22 AM

Originally posted by Putz

Understand these are dimensions for the early (through '95) inverted forks, but what about the later stuff? I'm looking for options on how to use that hardware.

If you go with a later 750 front end they will work in the 954 triplea nad give you a little extra ground clearance. To be on the safe side I'd look for a 954 that uses the tapered bearings like the GS uses. Honda used both types of bearings depending on year model. If you go with an 1000 or 1100 front end you need to use the triples from the donor bike. You can always swap out bearings. Here is a long extensive thread on how to make it all work.

BUILDING AN I.C.B.M. KATANA 1100 - The GSResources Forums

http://www.thegsresources.com/_forum/showthread.php?t=74779

NOTICE: I have changed servers and all the pics have been erased. I am in the process of finding and uploading as many pics as I can but will take a bit of time.... ENJOY. Visit my website (link below) for lots of tech info and pics. This is a full extensive performance and suspension build of an 83 1100 katana. The

Stay safe over there.

HELP!! Will a 96-99 GSXR 750 front end work for 82 GS1100E?

Comment