plugs/wires

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RotaryRodder
    #1

    plugs/wires

    I will be doing a tune up on my new bike (82 GS1100) I need to get spark plugs and wires. Since I am going to buy new ones anyway I was curious if there were any performance options on these, or are the factory spec ignition parts the best option?

    also, I need to find some good mailorder companies for parts. Any help would be greatly appreciated.

    thanks
    Tags: None
    • gwhunran
      #2
      I have had good luck with Z1 Enterprises. They have really been helpful and patient with me everytime I have dealt with them. Their prices are very good too. The owner (Jeff) also is a GS Resource member and frequently responds to post. http://www.z1enterprises.com/default.aspx


      Richard

        Comment

        • bj
          #3
          I second that suggestion. Jeff's great to deal with.

            Comment

            • scotty
              #4
              Have you already modified your coils to allow the wires to be removed. another wire option is an accel 7mm automotive kit. I can make 2 sets of/4 excellent wires for such a reasonable price.

                Comment

                • rkubik
                  #5
                  removeable coil wires

                  Originally posted by scotty
                  Have you already modified your coils to allow the wires to be removed....
                  Where can I find the above procedure? Thanks in advance

                    Comment

                    • scotty
                      #6
                      Originally posted by rkubik
                      Where can I find the above procedure? Thanks in advance
                      Lots of the gang just slowly and carefully dig out the glue that holds the original wires in place. I never did it i just used dyna replacement coils. Ask and lots of the gang know how to do it. I cant help there. Sorry

                        Comment

                        • RotaryRodder
                          #7
                          I was just looking at that last night.. I think ill just go with the dyna coils


                          what ohmage should I go with?

                            Comment

                            • Billy Ricks
                              #8
                              3 ohm coils.

                                Comment

                                • scotty
                                  #9
                                  Originally posted by RotaryRodder
                                  I was just looking at that last night.. I think ill just go with the dyna coils


                                  what ohmage should I go with?
                                  i believe the primary is a 2 to 5 ohm. Dont you have a service manual???
                                  again i will be corrected if im wrong. I think my dynas are 3 ohm. Its been a few years.

                                    Comment

                                    • Cajun Cycler
                                      #10
                                      Just my 2 cents, If you are going with the Dyna the coils you want are GREEN. 3 ohms.

                                        Comment

                                        • Billy Ricks
                                          #11
                                          You can get low mieage GSXR, Bandit, or Katana coils on Ebay usually for about $30 a set that are just like your originals.

                                            Comment

                                            Previous template Next
                                            Working...