advise

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    advise

    I get lots of emails and questions regarding gixxer conversions, frontend mods, swingarm mods, bracing, spacing and much more.
    should I condense my old ICBM KATANA build thread and put it up to answer many of the questions or no??

    its a bit of work but I don't mind if it is a help but I don't want to do it if it will just take up server space...

    what do you guys think??
  • humhead

    #2
    A condensed version of that thread (with pics if possible ) would be a valuable addition to the garage area. It just might save bandwith because it would cut down on the number of threads asking the same questions over & over.

    Terry

    Comment

    • Billy Ricks

      #3
      Do it, then Frank could either put it on the homepage or here with a sticky.

      Comment

      • Guest

        #4
        Do it.. I know i spend 98% of my time on this site just searching and reading old posts..

        Comment

        • Road_Clam

          #5
          Originally posted by katman
          I get lots of emails and questions regarding gixxer conversions, frontend mods, swingarm mods, bracing, spacing and much more.
          should I condense my old ICBM KATANA build thread and put it up to answer many of the questions or no??

          its a bit of work but I don't mind if it is a help but I don't want to do it if it will just take up server space...

          what do you guys think??
          Your GS to GSXR conv. experience is invaluable knowledge for all of us! I *DEMAND* it be made into a stickie!! (well I softly and politely demand, anyway). Place the stickie in the "tips and tricks" section, IMO thats a perfect place.
          Rich

          Comment

          • Hoomgar

            #6
            For sure Rob. It is going to be needed for years to come. Great idea, lets get it condensed and stuck!

            Comment

            • Mr. Jiggles

              #7
              Definitely - it's one of the best threads on this site IMO.

              Comment

              • Guest

                #8
                Ok dudes, I will work on short version and try to find some old pics
                On another note I had the beast out today for the first time with the new carbs. It was running like crap so I put some 20 pilots in her and gave it a 1/4 throttle crack at about 10mph and instant power. the rear wheel broke loose intantly and blead all over the street like in the rain..but oh yeh, bone dry road. she is all done now except for paint.

                I see many of the same questions time and time again on performance mods but I think, Yah, tips and tricks is the place for it.

                Comment

                • Guest

                  #9
                  I thought it was deleted but I see billy Ricks has the link on a thread...



                  I am a little confused cuz I can't find it but there it is.

                  Comment

                  • Billy Ricks

                    #10
                    Originally posted by katman
                    I thought it was deleted but I see billy Ricks has the link on a thread...

                    NOTICE: I have changed servers and all the pics have been erased. I am in the process of finding and uploading as many pics as I can but will take a bit of time.... ENJOY. Visit my website (link below) for lots of tech info and pics. This is a full extensive performance and suspension build of an 83 1100 katana. The


                    I am a little confused cuz I can't find it but there it is.
                    It's in the archives. The Archive link is at the bottom of the forum page. Frank could just sticky that thread.

                    Comment

                    • Hoomgar

                      #11
                      Change your thread viewing options guys so that threads do not expire.
                      You will see them all again then. They are still there Tada!

                      Comment

                      • 1quik6

                        #12
                        I would love to see you put together a thread with no talking in the middle, just Katmans posts from start to finish, preferrably with pictures. I find the info very helpful, but a little hard to find in 50-60 pages.

                        Comment

                        Working...