gs1150 forks fit a gxxer 17x 3.50 rim

[rjloope]

just wondering if a 17x 3.50 will fit in set of forks for a 1150??

[LarryT]

Yes thats what i used to mount my busa wheel to a GS1100. Go to the gallery 81 Gs1100 Larry Taylor

[LarryT]

What i used was the triple clamps and axle from a 1150 the forks were 82 GS1100

[rjloope]

hey

Hey larry i have talked to you in the past about your bike!! You sent me a bunch of pictures. I talked to you about your seat!! i am still interested in sending to you and have your guy do it!!!!

[solo suzuki]

not only will the wheel fit but so will the 4p nissin! :-D

[GS JOE]

Wait a second!!!!!!....I have been going nuts trying to find a complete front end off of a gsxr 750 or 1100 for my 81 gs1100e!!! Now I see this thread? Can some one tell me exactly what parts I need to do this before i lose the few hairs I have left on my head?

[solo suzuki]

Wait a second!!!!!!....I have been going nuts trying to find a complete front end off of a gsxr 750 or 1100 for my 81 gs1100e!!! Now I see this thread? Can some one tell me exactly what parts I need to do this before i lose the few hairs I have left on my head?

mine is a mix of parts, not the easiest way to go.
rebuilt GS 1150 EF frontend, gsx-R 1100 ('90-92) wheel and nissin calipers, GSF 750 (290mm) rotors. you'll need to make a couple of shims and something to stabilize the speedo drive from gsx-R donor bike :-D

[LarryT]

If you want easy put a complete newer GSXR 750-1000 almost a bolt on.go to the gallery, (1981 GS 750 Larry Taylor)

[LarryT]

The 1150 frontend was easier than the GSXR frontend the head light and speedo goes on as stock. Using the GSXR frontend i had to make a mount for them

[GS JOE]

those pics are of the same bike? if so, do you have the front end and swingarm for sale?.... first pic is Bad Ass!!!

[LarryT]

No I sold the 1100 a few years back, then built the 750

[GS JOE]

What bike was the swingarm from?

[LarryT]

it was two arms from a 87 gsxr1100

[Colin Green]

I can't quite follow what is what here. Can anyone confirm if a later model 17 inch wheel will fit a GS1150 EF and whether the EF rotor and calipers fit the new wheel or whether the rotor and calipers off the later model have to be used.

TIA

[posplayr]

What i used was the triple clamps and axle from a 1150 the forks were 82 GS1100

Stange mix:

3.5x17" Busa wheel, 1150 triple and GS1100EZ forks?
Do I have that right?

I see your 750 in the same color as the 1100 is Badd A$$ (USD and over braced arm)