swingarm

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • voodoochikin04
    #1

    swingarm

    i picked up what i believe is an 03 gsxr 600 swingarm and tire combo for less than dirt cheap.. will this fit my 78 gs1000 without much trouble. i understand making spacers for the pivot so my swingarm bolts fits the new arm.. but what about width? will this new one be short enough to fit in the space on my frame? thanks alot.. -Matt
    Tags: None
    • voodoochikin04
      #2
      well ive searched the forums.. using the search.. and i still cant find anything...

        Comment

        • Ogri
          #3


          Search a little harder. Or at least a little. I found these in about 5 minutes of simply looking through the forum. One of them is "stickied" at the top of the forum......

          BUILDING AN I.C.B.M. KATANA 1100 - The GSResources Forums
          http://www.thegsresources.com/_forum/showthread.php?t=74779
          NOTICE: I have changed servers and all the pics have been erased. I am in the process of finding and uploading as many pics as I can but will take a bit of time.... ENJOY. Visit my website (link below) for lots of tech info and pics. This is a full extensive performance and suspension build of an 83 1100 katana. The


          GS1000 streetfighter idea w/ picture - The GSResources Forums
          http://www.thegsresources.com/_forum/showthread.php?t=97905
          This is a performance build to create a Yoshimura GS1000 racebike tribute. New suspension components will be used, the motor will be tuned, and the frame will be braced. Bike as stock looked like this. Will most likely resemble in the end, the 1981 Yoshimura GS1000 racebike:


          swingarm angles - The GSResources Forums
          http://www.thegsresources.com/_forum/showthread.php?t=107924
          Hi there,I have some questions for people that have converted there GS's to single shock rear ends,or tried longer twin shocks. I have modified my Katana to suit '88 gsxr750 single shock suspension,and before I completely weld up the frame,I was looking for advice on swingarm and steering head angles. I was able to measure the


          1980 GS1100e Monoshock How-to - The GSResources Forums
          http://www.thegsresources.com/_forum/showthread.php?t=108909
          This is a writeup of how I converted my GS to a late model GSXR swingarm and monoshock. I did a lot of searching and reading to do this mod, and while a lot of people have done it before, I didn't find a succinct write-up that laid it all out in black and white. This post will attempt to do that. My bike is a 1980 GS1100e,



          Most of the information you need is in these threads. Also look for the thread by XDukeX.

          Good luck.

            Comment

            Previous template Next
            Working...