Project Gs

Collapse
X
Collapse
 
  • Page of 13
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 7 13 template Next
  • Kris V
    #46
    Brand new dampners,WOW very expensive and hard to get any more. All of the other hardware in a pile. The I drilled holes in the bolts of the dampners for safety wire to keep them in place instead of locktite . Notice the spark plug in the picture,still got good color after 96k on the engine.
    Last edited by Guest; 01-06-2008, 12:52 PM.

      Comment

      • Kris V
        #47
        OK,both fork legs ready for the lowering process and tube install...

          Comment

          • Kris V
            #48
            Now that I have cut the springs after I have put in the 2" lowering block from Pingel. If you don`t cut your springs you will never get that threaded end on and your forks will be ULTRA stiff...
            Last edited by Guest; 01-06-2008, 01:03 PM.

              Comment

              • Kris V
                #49

                  Comment

                  • Kris V
                    #50
                    Old set up,stock,dirty and high...
                    Last edited by Guest; 01-06-2008, 01:07 PM.

                      Comment

                      • Kris V
                        #51
                        New set up,lowered,clean and mean:twisted:

                          Comment

                          • Kris V
                            #52
                            Side view old[-(

                              Comment

                              • Kris V
                                #53
                                Side view new\\/...

                                  Comment

                                  • Kris V
                                    #54
                                    Other side view old...

                                      Comment

                                      • Kris V
                                        #55
                                        Other side new,more to come later.

                                          Comment

                                          • Guest
                                            #56
                                            I tried to clap but it doesn't work.
                                            Right on Kris!!! Looking good. Now to weld a mount for the oil cooler so we can go pick up our heads. :-D

                                              Comment

                                              • Kris V
                                                #57
                                                Yes that is next. I took apart the whole instrument console and cleaned it inside and out,wow that thing was filthy:shock: I love Suzuki`s way of thinkin, the whole instrument cluster can be disassembled and cleaned or repaired. The only thing that is stupid in that cluster is the tach,you can`t take it apart oh well it still looks nice.

                                                  Comment

                                                  • Kris V
                                                    #58
                                                    PAINT IS DONE....\\/

                                                      Comment

                                                      • Kris V
                                                        #59
                                                        I LOVE PURPLE AND SPARKLES:shock:....

                                                          Comment

                                                          • Kris V
                                                            #60
                                                            MORE....

                                                              Comment

                                                              Previous 1 2 3 4 5 6 7 13 template Next
                                                              Working...