Kawasaki GPz Swingarm on GS700E

[Guest]

Don't know if anyone has tried this before but I'm considering putting a swingarm from a 1982-1985 Kawasaki GPz on my 84 GSX 750S (essentially the same as a GS 700E). The reason is that I really dig the eccentric chain adjustment the Kwack swingarm features. Any thoughts?

[Smokinapankake]

Oops I meant 1983 to 1985 Uni-Trak swingarm....

[Smokinapankake]

Hello anyone????

[tone]

which arm exactly ? gpz900 arms wrap around the frame with the outer bearings held by the footrest mounts so i'd say that one is out without fairly major work

not sure but i presume the similar looking 750's are the same, the 1000rx & zx10 are a "nomal" arm ...but wide

[Smokinapankake]

This one...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=024&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=370023013122&rd=1

Looks to be fairly straightforward, might have pivot width issues as well as linkage problems. Dig those eccentric adjusters, tho.

[Hugh]

I've always liked the idea of eccentric adjusters also. You'd need to get a hold of one to compare and measure to see if it's possible. For a $10 bid you could get that one off of eBay and see if it's possible!

Hugh