This is on the 1000G. 1980. I said I'd post pics of the mounting etc & finally got around to it so here they are....
The wire covering you can see disappearing under the tank holds two cables, one runs up to the Orange white & is hard soldered to the harness about 6" back from the coils, the other one runs to the right hand coil, there is a link piece joining the two coils so I get power to both.
Orange wire is the blade fuse, blue is the ground.
I can still put the storage back in with this mod, if fits over the top of the relay exactly as stock with no adjustments. You need to be careful with the exact positioning of the relay though to avoid the ribs on the bottom of the tray.
I like it mounted here for a number of reasons:
1. Cool - no heat source.
2. Near battery - easy.
3. Mounted on battery box rubber mount
4. No chance of it getting wet
Dan
The wire covering you can see disappearing under the tank holds two cables, one runs up to the Orange white & is hard soldered to the harness about 6" back from the coils, the other one runs to the right hand coil, there is a link piece joining the two coils so I get power to both.
Orange wire is the blade fuse, blue is the ground.
I can still put the storage back in with this mod, if fits over the top of the relay exactly as stock with no adjustments. You need to be careful with the exact positioning of the relay though to avoid the ribs on the bottom of the tray.
I like it mounted here for a number of reasons:
1. Cool - no heat source.
2. Near battery - easy.
3. Mounted on battery box rubber mount
4. No chance of it getting wet
Dan
Comment