I searched this and couldn`t find it. I know there is a 38MM carb off a GSXR that works well on a GS1150. Is there a particular model or is there possibly a 40MM that may work. Thanks!!!
-
-
The Slingshots from the second generation, '88-'90, are supposed to be the hot setup. I've also seen carbs from one model, can't remeber which, that look alot like RS flatslides. They even have the accelerator pumps. -
Thanks Billy....I assume the later oil cooled and water cooled bikes are different??? How about a bandit....wonder what they`ve got?Comment
-
Bandit and katana carbs should work since they use the air/oil cooled motors. Thinking back, I believe the carbs that looked like RS flatslides were Katana parts.Comment
-
In 88-90 750R there are 36mm Mikunis and from there 38mm. In 89-90 1100R you find 36mm and 91-92 there are 40mm. In my humble opinion the 38 slingshots are best choice after RS flatslide carburetors ofcourse...
This situation is in european models, I have noticed that american models use different carburetor setup due to emission controls I think...for example some US models have smaller carburetors than other countries. And I think that there are even different models in different states?? For example I heard that California is extra tight about emission controls...so no full power models back there, right?
Comment
-
Are we saying that any oil cooled model will work but not water cooled due to spacing..I`m going to start looking around and I just wanted to make sure I know what I`m getting into. I guess I need to get the spacing specs so I can tell what is going on...anyone have that? Thanks again!Comment
-
Yes, the watercooled motors were narrower and spacing is different. Stick to air/oil cooled models.Comment
Comment