Gsxr 750 gauges on 600 Kat front end

[Guest]

[LeeGS550E]

Looks good!

Are those the kat 600 clip ons? No issues hitting the tank?

[posplayr]

Looks nice

I plan on putting 91 GSXR guages on my 86 GSXR1100G.

FYI the 1100 tach has a lower redline than the 750 if you have a choice that would be better for the olf GS.

[rapidray]

Jim, you NEED the GSXR 600 gauges that go to 16,000 RPM!!! Ray.

[posplayr]

Ray

Jim, you NEED the GSXR 600 gauges that go to 16,000 RPM!!! Ray.

U would have to build up the old slabbie motor to take full advantage of that tach

[Guest]

Looks good!

Are those the kat 600 clip ons? No issues hitting the tank?

Yes, except they are solid aluminum round barstock instead of tube steel. The holders are the stock 600 pieces. 1.5 in. from the tank is as close as they get.

[Guest]

I plan on putting 91 GSXR guages on my 86 GSXR1100G.

FYI the 1100 tach has a lower redline than the 750 if you have a choice that would be better for the olf GS.

Am planning on swapping an early gsxr 1100 motor into it in the next year or so. It has carbs from an '87 1100 on it also.

[rapidray]

U would have to build up the old slabbie motor to take full advantage of that tach

NO problem, mail me your motor & a blank check! I'll build you a motor that WILL do it & MORE than once!!! Ray.

[jwhelan65]

NO problem, mail me your motor & a blank check! I'll build you a motor that WILL do it & MORE than once!!! Ray.

Ready for me to send you an 1100 engine Ray!!!

[rapidray]

Or, if you don't want to pay shipping BOTH ways, I could build you one from one of my cores! Ray.