Anyone recognise these brake calipers?

[salty_monk]

They came on a GSXR1100 front end that I got that had a 17" wheel conversion (from a later model) on it.






Cheers,

Dan

[salty_monk]

[salty_monk]

These look like the pads... maybe they're stock 1100?

http://cgi.ebay.com/ebaymotors/SUZUK...Q5fAccessories

Dan

[posplayr]

they look like stock first gen parts

I'm guessing you are still sorting out the year on yours?

Do you have 20mm axle?

[Guest]

Yup. my bet is stock 1st gen calipers...

[salty_monk]

I think it's 17mm axle.

Thanks, at least I know what to get pads for.... Are there any common caliper upgrades known for those forks that bolt on?

Anyone know about the performance on these? They are 4 piston opposed type so should be pretty good but the swept area of the pad is a little small when measured against other more modern calipers....

Dan

[Guest]

Those look just like the gsx600 katana calipers that are on mine. They work very well, more than enough stopping power for me.

[salty_monk]

Thanks! I thought I saw some GSX pads that looked the same

[tone]

Those are stock gsxr 750/ 1100 slabside calipers (g,h,j) also very similar to gsx1100ef (1150)

[salty_monk]

Did they all have the funny automotive style brake lines on them rather than a normal banjo bolt or are they something TPO added??

[rapidray]

They came that way Dan. Ray.

[tone]

yup as ray says they came with that type of fitting

[mac1170]

Those are stock gsxr 750/ 1100 slabside calipers (g,h,j) also very similar to gsx1100ef (1150)

gday guys, definately stock early 750/1100, gsxr, the 1150ef' s had twin piston, not four regards.