Baseline jetting VM33's on 82 Kat 1000

[rapidray]

Have you adjusted the mixture screws to where the MOTOR tells you it wants them? Ray.

[Tarbash 27]

Maybe you could elaborate, because I'm obviuosly do this wrong.

[rapidray]

With the engine warmed up & idling, starting with #1, you slowly turn the screw in or out till you get the fastest idle it will do on that cylinder. If the idle jumps up a bit turn it back down to normal & move on to #2. Then do 3 & then 4. The motor will "tell" you where it wants the mixture screws. That is is easiest circuit in ther carbs to tune. I won't be suprised if you end up with the 17.5 pilots back in it. Ray.