Announcement

Collapse
No announcement yet.

campbell x-pipe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    campbell x-pipe

    looking at several exhaust options for my gs1100 project and was intrigued by the campbell x-pipe and was hoping i might get some feedback from anyone with info good or bad.Looks like it would offer some extra needed ground clearance due to the gsxr suspension
    thanks in advance
    Steve

    #2
    Don't buy into the mucho extra HP. It's BS.
    Do a search for X pipe. Maybe the old threads still exist.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      take a look here i found that a few months back and posted
      take a look at it
      Place your GS performance, tuning or mods related questions in this forum.

      Comment


        #4
        Pity it doesnt work...as looks good

        Comment


          #5
          Originally posted by voivod View Post
          Pity it doesnt work...as looks good
          My guess would be not so much it doesn't work, as it is seriously optimized for oval track racing and therefore only 'works' in a very narrow rev range.

          Comment

          Working...
          X