GS1100/GS1150 Cylinder Liner Specs?

[Guest]

Hi!
Does anyone here have the specifications (i.e: I.D, O.D, flange diameter and height dimensions) of the OEM cylinder liners for the GS1100 and also for the GS1150?

Note: I already know the I.D.s which are 72mm for the GS1100 and 74mm for the GS1150.

Any insight would be very appreciated!
Thanks!
Normand

[trippivot]

GS ZONE at A.P.E. has the specifications.

L.A. sleeve has them too. which is where APE gets them from.

[Guest]

GS ZONE at A.P.E. has the specifications.

L.A. sleeve has them too. which is where APE gets them from.

I have glanced at these ... but only see aftermarket big block applications.
I'm looking for the original OEM specs.
Thanks!

[Guest]

Yes, we don't have stock sleeve specs on our site.

Jay

[trippivot]

http://www.importperformanceparts.ne...eve_suzuki.htm,

http://advancedsleeve.com/2010_ASC_Catalog.pdf

http://www.cyclewareables.com/pages/street_cylinder_sleeves/cylinder_sleeves.htm

ok I was wrong, very sorry.

[Guest]

http://www.importperformanceparts.ne...eve_suzuki.htm,

http://advancedsleeve.com/2010_ASC_Catalog.pdf

http://www.cyclewareables.com/pages/street_cylinder_sleeves/cylinder_sleeves.htm

ok I was wrong, very sorry.

No need to be sorry trippivot! Thanks for the links!