Hi everybody, i'm a brand new member and posted my first post in the Owners category.... hope that was the right place. I just got a great deal on a gently used 77 GS750B w/ only 21,000 miles. It is in great shape and runs good. I have always wanted a late 70's era superbike replica ala Wes Cooley. I would like to get a 4 into 1 header but the only one available is a Mac all chrome system. I saw their black 4 into 1 with an aluminum caniater but it is for 81-83 gs 750's. My question is, will the pipes fit at the cylinders maybe with a little tweaking? I know i will probably have to fab a new mounting tab towards the rear. The bid conxcern is , will the pipes fit the cylinders. I hope someone can help me as i really like the look of the black 4 into 1's. Any advice or direction ... thank you in advance. James
-
-
if your wanting black exhaust ,just have the mac's powder coated... -
It can be made to fit. But the pipes made for 16valve bikes will hang lower under the bike. If you're trying to do a superbike recreation ground clearance (or at least the appearance of) is important, so it wouldn't look right.Comment
-
These silicone based powders can withstand prolonged service temp. of up to 1000F. Ideal for applications such as grills, stoves, furnaces and engines.
does your exhaust get that hot!!!Comment
-
This pic may be of use...
Comment
-
Thank you for the replies. I read elsewhere that a guy claims that he fit a 4 into 1 header from a GSX1100 that fit up almost perfectly on his 1977 GS750 at the cylinders with just a bit of modifying at the rear bracket. Anyone ever see or hear of this? It is probably too good to be true.Comment
-
i am in the process of fitting a set of header pipes from a Bandit 1200s to my 750 spacing is just about spot on will have to make some spacers to fit in the exhaust ports as the flanges are shorter on the Bandit.Comment
Comment