82 katana, 93 GSXR750 forks. Which 919 clamp?

[still_bluenoser]

Hey guys, I just picked up a 93 GSXR750 parts bike to use for the suspension. I can use the GSXR tripple trees, but I hear that 919 trees will give me another inch of ground clearance.

Which years 919 trees am I looking for? And am I only looking for the top clamp?

thanks in advance!

Patrick

[jwhelan65]

Its actually the Honda 954 that will work , Vortex makes the top piece as un after market mod also.

[still_bluenoser]

Ah thanks! Do most guys only use the top clamp, or just use the entire tripple?

[jwhelan65]

Just the top I think...check with Katman here on the forum.

[still_bluenoser]

Hopefully he chimes in. He doesnt accept PM's.

[jwhelan65]

Hopefully he chimes in. He doesnt accept PM's.

go to his website....http://www.suzuki-katana.com/

[ozgs]

I think that you will need the 954 upper and lower. They have different offset than the gsxr

[still_bluenoser]

It apears that the 929 early 2000's are the same as the 954 tripples.

[ukilme]

Mine is a 02 CBR complete tree. You do need both parts.

Also, you will have to change the bearings depending on the year of the clamp-I did and it is not hard.

[still_bluenoser]

Mine is a 02 CBR complete tree. You do need both parts.

Also, you will have to change the bearings depending on the year of the clamp-I did and it is not hard.

954 or 929?

[ukilme]

954 or 929?

I believe it was a 954 that year.

Sorry, for the late reply. I was moving over the last few days.