GS1000/ZRX 1100 swap

[russr33]

That would be me

Very nice. Sold my ZRX a year or so ago but remember you from there. Welcome to the forum; love the Cooley rep. Should be fun to watch. I'm running a Metmachex braced swingarm on mine and some of the morris mags you were talking about on the other thread.

[TheCafeKid]

Very nice. Sold my ZRX a year or so ago but remember you from there. Welcome to the forum; love the Cooley rep. Should be fun to watch. I'm running a Metmachex braced swingarm on mine and some of the morris mags you were talking about on the other thread.

Aggh gawd Russ get that damn tweak bar brace off there before you ruin your forks!
I'll make ya a nice magnesium one (wink wink nudge nudge)

[TheCafeKid]

That would be me

Hey Mr Wog I have a ZRX stocker seat, minty, if you're interested. God knows I'll never use it. I love my Corbin butt spoon

[Mr. Wog]

Very nice. Sold my ZRX a year or so ago but remember you from there. Welcome to the forum; love the Cooley rep. Should be fun to watch. I'm running a Metmachex braced swingarm on mine and some of the morris mags you were talking about on the other thread.

Nice who made up the exhaust can, what head pipe is that.

[Mr. Wog]

Hey Mr Wog I have a ZRX stocker seat, minty, if you're interested. God knows I'll never use it. I love my Corbin butt spoon

I'll get back to you if I may, I just bought a few and I'm getting tapped on play $. The bike build and car build have me tapped at the moment.
Low toy budget boy I be.

[russr33]

Nice who made up the exhaust can, what head pipe is that.

That is one of the period hand bent Yosh headers. I then had a custom can made for it by Jemco Exhaust here in Houston. It used to look like this:

[Mr. Wog]

You running a baffle ?
I have a GSXR header on there that just doesn't fit right, I picked up a V&H header I need to refurbish.
I have an older Yosh can for the it also, had a small mid pipe made.
HA ha look at that I do custom seats and still have the rat arse seat that was on the bike when I got it. Go figure eh.

[russr33]

You running a baffle ?

Yep Jemco made a baffle for it as well. They are big in the two stroke crowd. Ship all over the world. Nice to have them close. He also did custom can/baffle for a Harris exhaust I had come across that had a hole in the can:

[TheCafeKid]

I'll get back to you if I may, I just bought a few and I'm getting tapped on play $. The bike build and car build have me tapped at the moment.
Low toy budget boy I be.

No problem bro. I am in no hurry and trust me I know what it's like. Me havey very wittle pway money either.

I need new suspension bits for the Rex. Springs. Valves. Shocks. Those will cost me... Bloody fortune.

[Mr. Wog]

small update

While on the po mans build I have been painting instead of powder
rotors done.

[Mindless]

Looking good!

[Mr. Wog]

No problem bro. I am in no hurry and trust me I know what it's like. Me havey very wittle pway money either.

I need new suspension bits for the Rex. Springs. Valves. Shocks. Those will cost me... Bloody fortune.

So I'm assuming you like cafe style bikes by your screen name?
Here is a wing I sold not long ago.
1979 GL

[Mr. Wog]

update

Did a bit more to the bike.
Made some brackets to get the gauges mounted to the ZRX top triple.Had to modify the ignition switch to fit the triple.Some headlight brackets to fit the 43mm fork tubes mounted the wheels/tires. Waiting for chain and sprockets, I'm having a 630 sprocket made to fit the ZRX wheel. I need to go with the 630's to get the clearance for the swing-arm. Still going to move the shock mounts forward and finish the seat.

[first timer]

looking good, keep up the good work

[Mr. Wog]

Update

Almost done with the build I have a few small things to do. Get the mid pipe made for exhaust and some adjustments. Going to check it out the way it is but I'm still going to move the top mounting brackets forward for the shocks