Nos, how to, and basic info...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vishnu

    #1

    Nos, how to, and basic info...

    Well after a very long winter my project is very slowly coming along.
    Alot of the info in the inter webs is for cars.
    One thing I have been pondering, as a child of the 70's, is olds kool, Nos.

    There is something about a bike with tank(s) hanging off the side tht just jazzes me to no end. But I cant seem to find the relevant info. Is there a project or online resource that can tell me what i need to know? I have a new set of FCR carbs ready to install and I was hoping I could plumb straight into the via a vacuum port or something. I am not looking for massive amounts I was thinking about a 25 or 30 hp shot.

    Cheers
    Alan

    I did try the search button but it usually brings up NOS - new old stock...
  • dr_fosg8

    #2
    Searched for nitrous and turned up quite a few threads including this, http://www.thegsresources.com/_forum...hlight=nitrous

    Comment

    • Vishnu

      #3
      Originally posted by dr_fosg8
      Searched for nitrous and turned up quite a few threads including this, http://www.thegsresources.com/_forum...hlight=nitrous
      Thanks Dr Fosg8, I tried Nitros too, not realizing I was speeling it rong.

      Much appreciated.

      Cheers
      Alan

      Comment

      • rapidray
        Forum Guru
        GSResource Superstar
        • Oct 2006
        • 8195
        • So Cal

        #4
        Whatever you do, make SURE you have a way to retard the timing when the nitrous is on! Ray.

        Comment

        • ArttuH
          Forum Mentor
          • Jul 2005
          • 300
          • Finland

          #5
          Here is a pretty good web site about nitrous systems: http://www.nitrous.info/
          Arttu
          GS1100E EFI turbo
          Project thread

          Comment

          • Guest

            #6
            Here are the kits. Everything is included. http://www.aperaceparts.com/nos.html

            Comment

            • Vishnu

              #7
              Thanks guys for all the help! I'll start my search/research as we type!

              cheers
              Alan

              Comment

              Working...