pingel taps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    pingel taps

    for months my Gs1085s has been very ill.
    this morning start it up with petrol cap on it pops bangs run like poo.
    so i removed petrol cap when engine was running after a few secs the engine runs sweatly
    we have full power again.
    so next thing i did put a spare petrol hose on pingel tap ran it straight into a jug the flow differance is I say a 3rd more,with cap removed.
    new fuel cap about to be orded,just wondering if you can order a extra tanker breather might help.
  • hampshirehog
    Forum LongTimer
    Past Site Supporter
    • Oct 2007
    • 12675
    • Hampshire. UK

    #2
    You can take your current filler cap to bits and give it a clean. If it's original it's 100 times better quality than the after market junk you'll end up getting (unless you're very lucky - a proper one is ?75 from Robinsons and a copy is ?15).
    79 GS1000S
    79 GS1000S (another one)
    80 GSX750
    80 GS550
    80 CB650 cafe racer
    75 PC50 - the one with OHV and pedals...
    75 TS100 - being ridden (suicidally) by my father

    Comment

    • Agemax
      Forum Guru
      • Apr 2008
      • 8371
      • plymouth uk

      #3
      yeah strip it and clean it, no need to buy a new one. no need for an extra breather
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment

      • Guest

        #4
        Originally posted by hampshirehog
        You can take your current filler cap to bits and give it a clean. If it's original it's 100 times better quality than the after market junk you'll end up getting (unless you're very lucky - a proper one is ?75 from Robinsons and a copy is ?15).
        thanks normaly i would use Robinsons but looked on eb*y there a place selling them genuine
        suzuki ones ?19 buy it now.

        Comment

        • Guest

          #5
          Originally posted by Agemax
          yeah strip it and clean it, no need to buy a new one. no need for an extra breather
          i have stripped my orignal cap its all like varnished up and the seal is very cracked ,so
          where does the cap get it air vent from where you put key in.
          mind you cap is 31yrs old now.

          Comment

          • Agemax
            Forum Guru
            • Apr 2008
            • 8371
            • plymouth uk

            #6
            soak it overnight in parrafin or similar. easy enough to make a new seal, far cheaper than buying a new cap
            1978 GS1085.

            Just remember, an opinion without 3.14 is just an onion!

            Comment

            • Guest

              #7
              Originally posted by Agemax
              soak it overnight in parrafin or similar. easy enough to make a new seal, far cheaper than buying a new cap
              will try this idea first if that dont work have a m8 who has a sonic cleaner have it dunked in there.

              Comment

              • Agemax
                Forum Guru
                • Apr 2008
                • 8371
                • plymouth uk

                #8
                sonic cleaner will work with the right fluid in it
                1978 GS1085.

                Just remember, an opinion without 3.14 is just an onion!

                Comment

                Working...