Question on jetting for 1982 GS1100L

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JustRide
    • Jan 2026

    #1

    Question on jetting for 1982 GS1100L

    Does anyone have the details on what is included in the stage 1 jet kit from dyno jet. Like what size jets they use etc. The kit from them is about $180 and I figure I could put it together my self for much less if I new what the parts were.

    Thanks, Jay
  • blowerbike
    Forum Guru
    GSResource Superstar
    • Aug 2008
    • 7057
    • Ohio Closer to KY Than Cleveland

    #2
    180??????
    doesn't sound right...
    you need there needles...
    if your running an airbox then just richen the idle circut and maybe bump the main a little if you have a header.
    no jet kit needed unless you remove the airbox and go to individual filters.

    Comment

    • Agemax
      Forum Guru
      • Apr 2008
      • 8371
      • plymouth uk

      #3
      yep, its not just the jets you need its the special DJ needles that makes them work so well. as said, with stock airbox and maybe just a 4 into 1 you may (or may not) just need to up the mains by a size or 2.
      my Gs1000EC ran perfect with stock airbox, stock carbs and jets with a Harris race pipe, no jet changes required.
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment

      • JustRide

        #4
        Ok thanks folks.

        Comment

        Working...