picked up a old lockhart oil cooler the other day which came with the oil filter cover which has the oil lines attached to it now i no my gsx dos not come with a cooler but wondered if this will go on it
gsx1100et oil cooler
Collapse
X
-
gsx1100et oil cooler
hi all
picked up a old lockhart oil cooler the other day which came with the oil filter cover which has the oil lines attached to it now i no my gsx dos not come with a cooler but wondered if this will go on itTags: None -
bluehwy -
ozman
Comment
-
bluehwy
Okay, guess that was an obvious question. Did they come stock on the '80 GS 1100E? I can't find it in my manual.
What I don't like about my oil cooler is that the fittings aren't lined up just right and it has a slight leak. Also, I can't figure out where to get replacement lines. I have homemade SS lines on mine and the frayed ends poke the s(*0 out of me when I change the filter.Comment
-
bluehwy
Thanks Ray, maybe that's where mine came from. What year 1150 would you suggest?
Pagan, how did your lockhart fit. Where did you find it?
I'm mostly interested in trying to find braided lines to match my brake lines. Any ideas?Comment
-
bluehwy -
bluehwy -
Guest -
bluehwy -
bluehwy
Ray, can you point me in the right direction for locating an 1150 oil cooler and lines, preferably SS braided?Comment
-
Blue, the cooler in your pics is NOT a stock cooler from Suzuki. ALL years of the 1150 coolers are the same. Ebay is your best bet to find an 1150 cooler but be aware that you will need the 1150 oil filter cover also or to modify the 1100 cover. Call me at 714--356-7845 if you need any help. Ray.Comment
-
bluehwy -
I have found several 1150 coolers on ebay lately in decent shape and priced around $75 -$125 with lines and fittings. I was shocked to find that the oil filter housing covers are rare and hard to find. Retail is around $135-$155 for a new cover. I have bid as high as $95 on ebay and let them go. Even at my dealer cost it was still $105 including the tax. So any way unless you modify your stock cover or fabricate some sort of a restrictor to install plan on spending as much or more on the cover then you will on the cooler. At least that has been my luck so far.sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.Comment
Comment