Potential Group Purchase - Wiseco GS650 741cc pistons

[tkent02]

You're not, we're still waiting.

Count me in for a set if I'm not too late.

The price I gave is for a piston a set of rings and a wrist pin. Borish is right if you look on eBay there is still a few big bore 650 head gaskets. The base gasket is just a standard 650 gasket. There are a lot of those on ebay

I think we'll have to get special one, for the headgasket, because this is an oversized kit. For the basegasket... a gs 650 one would fit, I think

[frankenwabbit]

thanks Ace07 for the info.... what about headgasket/basegasket?

Is that price per slug or price for the whole set?

Hey frankenwabbit,A couple of the guys are waiting to save money for the Pistons as well. Me and another guy are ready to order now. The minimum order we have to send to wisco is 12 Pistons and they are 110-115 dollars for the piston rings and wrist pins. The boring you will have to have done somewhere else.

[frankenwabbit]

new gs guy here....potentially interested. when would this be happening? gotta start saving a lil bit.

i haven't done the 550/650 swap yet, but have pretty much all the parts minus gaskets. i'm thinkin of putting the hybrid motor together first (haven't put a motor together before, but have wired a whole car, turbo kit, suspension, etc)




so would we be looking at pistons/rings/pins , boring and then getting a different headgasket for the oversized swap?

Ok, so if you take 2 sets ace07, there are 12 pistons..? If it is sufficient to make an order, I think am yours

Well I am on board with ordering them any time. Sooner the better now. The only problem borish is we have to have a minimum of 12 Pistons. I might be able to swing 2 sets of Pistons. It's just pricy for me. You and me are eating to buy them now, borish.

Ok nice! 125$ each right now is a good deal.
But : how can I order them?

[tkent02]

If you're in a hurry get those. Most of us want to wait for various reasons. I don't have an engine to do right now, just don't want to miss the opportunity when it happens so I'm in, just don't want to be in right now. I'd also rather sell a couple bikes first. I'll do it if I have to, but I'd rather wait.

Who is your manufacturer?

[Chuck78]

Wiseco can start right now for $125 per piston.

Oups sorry double post

Hi! For those who are interested now, I can lauch manufacturing. It's a bit more expensive but they can start now. It is not wiseco but another piston manufacturer.190$ per piston with axis rings... Who is ready now?