Choices Camshaft ??

[madmikeracing]

Guess web cams it for cams for the old gs engines. I used to like cam motion cams a lot, Had andrews in my 1000 . Now my question is it better to get hardwelded cams or new fro mweb?? Which is better possibly more durable?

Regrind N/A Hardweld 71-251 $616.00 New Cam 71-252 $611.00 Qty:
.416/.416	266?/266?	244?/244?	263

These are the ones Im looking at buying. They would be for a 1500 hi comp engine. Thanx Mike

[GS1150Pilot]

Orient Express has had billet cams available for various GS models.

[Guest]

WebCam will make you any grind you want. Why so big on the exhaust cam are you spraying it also?
I like the 420/390 for a big NA motor

[rapidray]

I have a NICE set of that exact cam if you are looking for a deal. I am also a dealer for Web & am at their place a couple of times a month.
Ray.

[madmikeracing]

YES 150 SHOT nos Ray how much. I am in Canada.

[madmikeracing]

Thank You for the offer Ray but I only Buy new camshafts. My pos twas is it better hard welded?? or what they call new billet cams?

[rapidray]

Either way, I can get you new billets or hard welds. The set of .416s I have I can send you pics of. I am honest about the stuff I sell & I wouldn't hesitate to run them in my own engine, & I am PICKY!! LOL!!!
Ray.

[GS1150Pilot]

Speaking of which, anyone have a modified GSX-R intake cam set up for the 1150 which they might want to part with?

[rapidray]

I can do the mod for you but I am out of the good 88/89 GSXR750 cams. I have LOTS of GSXR1100 cams.
Ray.

[madmikeracing]

Gee I must be a bad speller. I am aware of that. I wondered if when buying new camshafts hard-welded ones were better thn billet as advertised or there is zero difference? Im curios. If i end up spending a load of Canadian money on cams i wanted to get the best quality I could. Especially with the rocker and Camshaft issues I have suffered previously. Thanx Mike

[GS1150Pilot]

I can do the mod for you but I am out of the good 88/89 GSXR750 cams. I have LOTS of GSXR1100 cams.
Ray.

Awesome, Ray. Does the 1100 cam offer similar benefits?

[rapidray]

Are you going to use welded rockers arms Mike?
Ray.

[rapidray]

Awesome, Ray. Does the 1100 cam offer similar benefits?

They are bigger than the stock GS cams, yes.
Ray.

[GS1150Pilot]

I'll PM you, Ray. Thanks!

[posplayr]

I'll PM you, Ray. Thanks!

You are changing the carb jetting