I am looking for a little advice on taping the intake/carb boots on my gs1100 for nitrous foggers. what can i use to help seal them in good? i tried searching but couldn't find and threads. maybe a write up is in order?
-
-
Yah spelled fokker wrong!
JK1983 GS 550 LD
2009 BMW K1300s -
You will use a 1/8 pipe tap to thread your head & teflon tape to seal the threads.
Ray.Comment
-
Don't the NOS foggers use a 1/16 NPT?Comment
-
You may find that when nitrous is not engaged there may be less power than before the nitrous installation. The nozzles take up a fairly large percentage of the area inside the boots with nozzles installed thereby reducing flow volumeComment
Comment