Spacer size gs1000

[trevor]

Hi guys,
Doing a chain and sprocket conversion to 530...my dealer says they can't get me the spacer...going to see if I can get one at my local machine shop...can someone give me the dimensions of the spacer I need?
Thanks

[bobgroger]

Hi guys,
Doing a chain and sprocket conversion to 530...my dealer says they can't get me the spacer...going to see if I can get one at my local machine shop...can someone give me the dimensions of the spacer I need?
Thanks

6MM thick. https://www.amazon.com/JT-Sprockets-.../dp/B001AVVUZ2
dimensions http://www.jtsprockets.com/catalogue/sprocket/JTF518B

[bobgroger]

6MM thick. https://www.amazon.com/JT-Sprockets-.../dp/B001AVVUZ2
dimensions http://www.jtsprockets.com/catalogue/sprocket/JTF518B

Also, it goes under the nut, not under the sprocket. A couple washers from the hardware store would work OK if you can't get one.

[trevor]

Thanks Bob....

[bobgroger]

I can send you one if you want. I looked on amazon.ca and it looks like you get hosed, eh. I can get one Friday for $6.70 delivered.

[salty_monk]

You can get something that'll work at the hardware store. I had to clearance them with a dremel slightly from memory. 2mm each. Stack of 3. It's only to make sure the nut tightens down on something.